乐畅奇KDS 230P可编程多通道注射/抽取泵
Ideal for applications requiring multiple syringes, the KDS230 is an adaptation of the KDS210. The pump operates exactly like a KDS210, but has been modified to hold up to 10 syringes.
多通道注射应用的理想选择，KDS230是KDS210的一个改编加强版。这个款型跟KDS210操作起来非常像，除了此款可以夹的注射器高达10个。

 
Features特点:
 Multiple syringe holder:
多注射器夹具
 One to ten syringes, 10 µl - 10 ml
一到十个注射器，每个注射器10 µl - 10 ml
 One to six syringes, 20 ml - 60 ml
一到六个注射器，每个注射器20 ml - 60 ml
 One to four syringes, 100 ml - 140 ml
一到四个注射器，每个注射器100 ml - 140 ml
 Withdrawal then infusion
先抽取后注射
 Backlit LCD display
LCD背光灯显示屏
 Knob locks/unlocks drive block for effortless, drag-free adjustment
锁定/解锁驱动块通过旋钮可轻松手动调节
 Simple menu-driven setup:
设置简单，菜单提示
1. select syringe size from displayed table
显示表格中选择注射器尺寸
2. dispense volume
注射量
3. dispense flow rate
注射速率
 Continuous dispense volume display
显示连续循环注射量
 Preset volume control and automatic shut-off
预设注射量，到达时会自动关闭
 Choice of unit selection
单位选择
 Settings can be reviewed or changed during operation
运转时可以重新设置或改变参数
 Stall detection
失速检测
 Last settings stored in permanent memory
最后参数设置自动保存，下次开机时不需要再输入
 Built-in RS232C interface for computer "daisy chaining" up to 100 pumps
内置RS232C接口可连接电脑，可以串联100台泵
 TTL interface for foot switch, timer, relay control, outputs for run indicator, valve control
TTL接口可接脚踏开关、计时器、继电器控制、运行指示器输出、阀门控制
 Independent rate and volume settings for infusion and withdrawal
注射和抽取的流速流量可单独设定
 Multiple mode selection:多模式选择多种模式选择：
– Infusion注入、Withdrawal抽取、Infusion then withdrawal
注入后抽取、Withdrawal then infusion抽取后注入、Continuous cycle连续循环
 Multi-step keypad programmable feature (KDS230P)
多步骤键盘编程功能（KDS230P）