http://www.equl.com/products/phmeters/IQ500/IQ500.htm

or>


Product Spotlight

--------------------------------------------------------------------------------

IQ500 processLab pH Controller/Analyzer
(Use non-glass or glass probes for continuous monitoring)

The new processLab™ Series of pH Controller/Analyzers accept rugged non-glass, silicon chip sensor probes as well as conventional glass sensor pH probes. Designed for in-line continuous process monitoring applications, the waterproof processLab ™ pH Controller/Analyzer is an extraordinary powerful instrument with easily configurable relay and analog outputs. Menus in plain language make set-up and operation easy. The extra large 5 1/2" backlit LCD display is easy to read and the status of all relays and outputs is visible at a glance.

Features:
Uses non-glass pH probes with silicon chip sensors or conventional glass sensor probes.
Plain text menus on an extra large 5-1/2" (140mm) backlit LCD display make set-up, calibration and operation easy.
Rugged NEMA 4X (IP67) waterproof polycarbonate enclosure
Simultaneous display of pH, temperature, date/time, and status of all relays and mA outputs
Four relays for ON/OFF, Pulse Length, Pulse Frequency, or Alarm Control
Four optically isolated 0/4-20 mA outputs


IQ500 processLab pH Controller/Analyzer and Accessories
IQ500
processLab IQ500 pH/mV/Temp/ORP Controller/Analyzer

Price $12,999.00
PHO8D-SS
In-line pH electrode, threaded Kynar style, with non-glass silicon chip pH sensor.
Waterproof quick disconnect (cable ordered separately)

Price $399.00
PHO9D-SS
In-line pH electrode, stainless steel sanitary style fitting,

with non-glass silicon chip pH sensor.
Waterproof quick disconnect (cable ordered separately)

Price $499.00
C12
12 feet cable, quick disconnect

Price $199.00
C20
20 feet cable, quick disconnect

Price $249.00
C30
30 feet cable, quick disconnect

Price $299.00

　

　


Specifications

Range 0.00 to 14.00 pH, ±999.9 mV, -5 to +105º C
Resolution 0.01 pH, 0.1 mV, 0.1º C
Accuracy ±0.02 pH, ±0.5 mV, ±0.5 º C
Calibration Grab sample (calibrate single point to any pH value),
one point, or two point
Automatic Buffer Recognition 1.68, 2.00, 4.00, 4.01, 6.86, 7.00, 9.18, 10.00, 10.01, 12.00, 12.45
Automatic Temperature Compensation (ATC) -5 to 105 º C: three or 4 conductor Pt 1000 RTD
Manual Temperature Compensation (glass pH only) -5 to +105º C
Display 5-1/2" 360 x 240 pixel LCD with LED backlight
Enclosure NEMA 4X (IP67) waterproof polycarbonate
Relays Four Electromechanical SPDT contacts. UL rated 5A 115/230 VAC, 5A @ 30 VDC resistive. Each relay can be driven by the measured pH, mV, or temperature
Relay Operating Modes Each relay can be set for ON/OFF, Pulse Length, Pulse Frequency, or Alarm Mode. Control settings for high/low phasing, setpoint, deadband, overfeed timer, on delay, off delay. Alarm settings for high/low alarm point, high/low deadband, on delay, off delay
Analog Outputs Four optically isolated 0/4-20 mA outputs. Each output can be driven by pH, mV, or temperature
Operating Temperature (Controller) -4 to +140ºF (-20 to +60º C)
Power Requirements 110-230VAc. 50/60 HZ. No jumper or switch settings necessary
Battery Backup Built-in lithium back-up battery
Dimensions 11"W x 9"H x 3.5"D (280mm x 152mm x 89mm)
Net Weight 3.5 lbs