各种搅拌器II -实验室常用设备-仪器设备-生物在线
上海易扩仪器有限公司
各种搅拌器II

各种搅拌器II

商家询价

产品名称： 各种搅拌器II

英文名称：

产品编号： _TY2414

产品价格： 0

产品产地： 美国产

品牌商标： EQUL

更新时间： null

使用范围： null

上海易扩仪器有限公司
  • 联系人 :
  • 地址 : 上海市肇嘉浜路
  • 邮编 : 200032
  • 所在区域 : 上海
  • 电话 : 133****6815 点击查看
  • 传真 : 点击查看
  • 邮箱 : info@equl.com
进入展台

Shakers

振荡器

  • Variable speeds for more thorough shaking
  • 可变速功能可以确保彻底的振荡
    　
  • Designed to accept a variety of holders to meet a wider range of shaking needs
  • 不同的支架可满足不同的需求
    　
  • DC filtered motors to handle heavier loads and provide greater durability
  • DC filtered电机可承担较重的负荷和提供较大的耐力
    　
  • Motions designed to simulate shaking by hand
  • 模拟手工的振荡
    　
  • Designed to reduce the handling of glassware for greater safety and cost savings
  • 减少了手动的麻烦
BENCH-TOP SHAKER
用于分子杂交, DNA提取, 免疫测定, 血细胞溶解等医药及工业应用.

台式摇床适合各种玻璃容器, 解决各种试验室混合需要
　
马达转速可调,最大转速可达125rpm, 适合各种摇动速度

无需载荷平衡, 安装方便, 可安装不同种的容器, 设备体积小, 载荷量可达9.1Kg


Reciprocating shaking and mixing with bench-top convenience is now available. Glas-Col''s Bench-Top Shaker is an adaptable, user-friendly shaker that is capable of many hours of continuous shaking and mixing. This shaker:
  • features a variable-speed motor that provides gentle, low-speed shaking to vigorous, high-speed shaking.
  • requires no load balancing.
  • features a built-in shaking head with easy-to-adjust knobs for quick loading.
  • will accept a variety of glassware holders for mixing and shaking.
  • may be placed inside a fume hood for added safety.
  • features a strong, heavy-duty construction that permits maximum loads of up to 20 pounds.

Specifications
Motor Speed: Adjustable to 125 rpm maximum.
Load Weight Capacity: Up to 20 lbs. (9.1 kg).
Electrical: 6-ft, 3-wire grounded cord.
Electrical Rating: 50/60 Hz, 120V & 240V.
Size: 13"w x 10"d x 11-3/4"h.
Weight: 48 lbs. (21.8 kg).
Finish: Foxtip gray and charcoal.
Catalog Number Description Input
Voltage		 RPM Product
Weight (lbs)
099A S60012 Shaker base 120V 2-125 54.0
099A S60024 Shaker base 240V 2-125 54.0
　


SEPARATORY FUNNEL HOLDER
(up to 500 ml)

The funnel holder will accommodate up to three funnels at once, depending on size, and can hold funnels as large as 500 ml. You can mount one or two of these holders on the shaker base.
Just load the funnels with the stopcock down, adjust to the desired shaking position, and turn on the shaker. The funnel is secured by an easily adjusted yoke, and the stopper is held in place by a built-in elastic band.

If you''re mixing materials that create pressure while being shaken, the pressure can be relieved automatically with the Snorkel Stopper, which is substituted for the regular stopper, and is held in place with the elastic band. It automatically relieves pressure over one pound (psi).

Catalog Number Description Product Weight (lbs)
099A FR435SS One, two, or three 60-250 ml funnels 3
099A FR600SS Two 125-500 ml funnels 4
　


SEPARATORY FUNNEL HOLDER (1000 ml & larger)
The separatory funnel holder is designed to allow 1- or 2-liter separatory funnels to be held in the positions necessary for sample processing, but with minimum handling of fragile funnels. From the upright, or fill, position the funnel may be rotated to the 45° or 60° position for shaking and then returned to the upright position for the addition of materials or extracting. The flask may remain in the holder during the entire cycle. This holder requires the use of the Universal Mounting Platform (099A BT6000).
Catalog Number Description Dimensions (in) Product Weight (lbs)
099A BT2000S 2-liter separatory funnel holder
(099A BT6000 required)		 12.50h x 9.50w x 5.50d 3.2
099A BT1000S 1-liter separatory funnel holder
(099A BT6000 required)		 11.25h x 9.50w x 5.50d 3.2
R80 258 Up to 1 liter stopper retainer 　 0.5
R80 255 2-liter stopper retainer 　 0.5
When using standard funnels with glass, plastic or teflon stoppers, our stopper retainer is required.
　
UNIVERSAL MOUNTING PLATFORM 　
The Universal Mounting Platform is required for mounting Series BT glassware holders. It also provides a horizontal surface for the easy attachment of a wide variety of vessels that need to be shaken.

The Universal Mountain Platform is set conveniently on top of the shaker head and is held securely with three hand-tightened locking knobs. The Series BT holders also install quickly atop the platform through pre-located mounting holes. Two locking knobs secure each holder in place. The platform accepts two holders.
　

　


Catalog Number Description Product Weight (lbs)
099A BT6000 Universal mounting platform 4.0
　

　
LARGER-FINGER CLAMP
Larger-finger clamps are available for use with the Bench-Top Shaker. They can hold various types of glassware up to 3-1/2" (89 mm) in diameter. The clamps may also be adjusted to hold glassware at the most effective shaking angle. Sold individually.
Catalog Number Description Product Weight (lbs)
R96 344 Large-finger clamp, each 1
　


TEST TUBE RACK HOLDER

The test tube rack holder lets you shake one or two entire racks of test tubes at once. Even racks containing different size tubes can be shaken simultaneously. Racks are held in place by a restraining cover. This cover automatically releases and remains captive when retaining nuts are loosened for rack insertion or removal. Existing racks up to 12" x 5" (30.5 x 12.7 cm) may be used with capped or stoppered tubes from 75 to 200 mm long.

Catalog Number Description Dimensions (in) Product Weight (lbs)
099A TR700 Test tube rack holder 11.50h x 13.25w x 6.75d 3.2

ERLENMEYER FLASK HOLDER
Model 099A EF521 lets you shake one to four Erlenmeyer flasks at a time. It will work with uncapped flasks (for gentle shaking), or you can close them with screw caps or tapered stoppers. An elastic band automatically holds the stoppers in place. One or two flask holders can be shaken at once. A locking knob secures holder in optimum positions for both loading flasks and for effective shaking. While mounted on shaker, the holder can be rotated 180°. Each holder adjusts to accommodate three 500 ml flasks or four 125 or 250 ml flasks. A combination of flasks is possible, as well.
Catalog Number Description Dimensions (in) Product Weight (lbs)
099A EF521 Erlenmeyer flask holder 8.00h x 12.75w x 4.50d 5.3
　
CENTRIFUGE TUBE HOLDER 　
The centrifuge tube holder allows shaking vertically to let gases escape, or horizontally with stoppers secured by a plate. Each holder accommodates up to eight tubes. Up to three holders can be shaken at once. The total load may be up to five pounds (2.27 kg) and need not be balanced. If sizes other than those listed in the table are needed, call us with your requirements.


Catalog Number Description Dimensions (in) Product Weight (lbs)
099A SR815 15 ml glass centrifuge tubes
Test tubes up to 16 mm dia.
126-160 mm long (stoppered)		 9.00h x 6.50w x 4.50d 1.3
099A SR850 50 ml glass centrifuge tubes
Test tubes up to 28 mm dia. 140-180 mm long (stoppered)		 9.00h x 6.50w x 4.50d 2.1


FAT-EXTRACTION TUBE HOLDER

This tube holder lets you use the Bench-Top Shaker for Mojonnier fat extraction. Each holder accepts up to four flasks, 37 mm in diameter.
Maximum of two holders can be shaken at one time. The load max of up to five pounds (2.27 kg) need not be balanced. Unstoppered flasks may be shaken vertically. For horizontal shaking, flasks should be stoppered and stoppers held with built-in restrainers.
Catalog Number Description Dimensions (in) Product Weight (lbs)
099A MFG3 Fat-extraction tube holder 8.75"h x 13.00"w x 4.50"d 2

　

3D PLATFORM SHAKER
Because the versatile, variable-speed Platform Shaker can handle a variety of mixing applications, it''s a great choice for any laboratory.
  • Shaking action from gentle rocking to firm 3D shaking.
  • Delivers results for the following applications: hybridizations- DNA extraction - immunoassays - staining and destaining of gels - mixing of blood samples - reconstituting antibiotics - medical and industrial
  • Comes with metallic rack and non-slip rubber pad.
    　

Contact the factory for special applications.

Specifications
Size: 13"w x 10"d x 11-3/4"h.
Speed Range: 0-82 rpm.
Electrical Rating: 50/60HZ, 120V & 240V.
Electrical: 6-ft., 3-wire grounded cord.
Load Weight Capacity: Maximum of 20 lbs.
　
　
Catalog Number Description Product Weight (lbs)
099A TDS112 3D Platform Shaker, 120 volts 3.2
099A TDS124 3D Platform Shaker, 240 volts 3.2
099A TDS100 Multi-tier platform 1.0
　


MID-RANGE 3D SHAKER
The Mid-Range 3D Shaker gives you the same convenient, consistent 3D shaking on your bench top as you get with our 3D Floor Shaker.
　
  • Mechanically shakes glassware for consistent, repeatable results.
  • Fits in fume hood to protect personnel from fumes. (Minimum 30"d x 36"l x 36"h for 2-liter sep funnels; 24"d x 72"l x 36"h for sizes up to 1-liter).
  • Handles total loads up to 40 lbs without needing to balance load.
  • "Lazy Susan" design allows 360° rotating of platform for easy loading and unloading.
  • Platform locks in place for added safety.
  • Accommodates up to four 2-liter separatory funnels.
  • Glas-Col''s automatic venting separatory funnels available for added safety.
    　
　

　



Specifications
Motor: 1/4-hp continuous-duty motor.
Load Weight Capacity: Maximum of 40 lbs. (18.1 kg).
Electrical: Power switch, circuit breaker, pilot light, and 6-ft., 3-wire cord. Digital speed and countdown interval timers.
Electrical Rating: 660 volt-amps.
Size: Shaker base dimensions-22"d x 17"w (55.9 x 43.2 cm). Height to platform 14" (35.6 cm). Octagonal platform-19" (48.3 cm) across corners.
Finish: Foxtip gray and charcoal.
RS232: Port can be used with LabNetix software.
Catalog Number Description Input
Voltage		 RPM Product
Weight
(lbs)
*099A VS20012 Shaker base only 120V 10-170 165.0
*099A VS20024 Shaker base only 240V 10-170 165.0
099A VS21012 Shaker base w/four 1-liter separatory funnel holders 120V 10-170 165.0
099A VS21024 Shaker base w/four 1-liter separatory funnel holders 240V 10-170 165.0
099A VS22012 Shaker base w/four 2-liter separatory funnel holders 120V 10-170 165.0
099A VS22024 Shaker base w/four 2-liter separatory funnel holders 240V 10-170 165.0

*Note: Glassware holders not included. Order separately.
　


FUNNEL OR FLASK HOLDER
Each separatory funnel holder will hold one funnel, and you can use up to four holders which mount to the platform without fasteners.
　

While the rear support of the funnel holder remains stationary, the front part holding the funnel can be released and rotated 360°. This permits the funnel to be filled, inverted for shaking, and then reinverted for addition and/or extraction, all while the flask remains in the holder. This also helps to eliminate breakage of glassware caused by handling.
　

When using standard funnels with glass, plastic, or Teflon® stoppers, our stopper retainers are required. Gas pressure can be released by inverting the funnel and shaking with the stopcock open. Gas pressure can also be released automatically by using Glas-Col''s patented VentSep separatory funnels (see Shaker Glassware section). The Erlenmeyer flask holder will hold a single flask and the volumetric flask holder will hold one flask.

Catalog Number Description Height (in) Width (in) Depth (in) Product Weight (lbs)
099A VH0250S Holder for 250-ml separatory funnel 11.0 7.00 8.25 5.5
099A VH0500S Holder for 500-ml separatory funnel 11.0 7.00 8.25 5.5
099A VH1000S Holder for 1000-ml separatory funnel 11.0 7.00 8.50 5.5
099A VH2000S Holder for 2000-ml separatory funnel 11.0 7.25 9.50 5.5
099A VH0250E Holder for 250-ml Erlenmeyer flask 11.0 7.25 9.00 5.5
099A VH0500E Holder for 500-ml Erlenmeyer flask 11.0 7.25 9.25 5.5
099A VH1000E Holder for 1000-ml Erlenmeyer flask 11.0 7.00 10.00 5.5
099A VH1000V Holder for 1000-ml volumetric flask 11.0 7.00 8.50 5.5
099A VH2000V Holder for 2000-ml volumetric flask 11.0 7.25 8.50 5.5
　
3D FLOOR SHAKER 　
This shaker eliminates time-consuming and tiring shaking of large vessels by hand.
　
  • Vigorously shakes large separatory funnels.
  • 3D motion circulates liquid up, down, sideways, and around for effective mixing.
  • Excellent for hemolyzing blood, water pollution analysis, or drug analysis.
  • Shakes up to eight 2-liter funnels; no balancing required.
  • Rack design minimizes strain on drains and stopcocks and reduces the possibility of broken glassware.
  • Can be adapted to accommodate other types of vessels.

Consult factory for special applications.
Specifications
Load Weight Capacity: 80 lbs. (36.3 kg).
Electrical: Features a power switch, circuit breaker, and 6-ft,3-wire cord. Digital speed and countdown interval timers.
Electrical Rating: 660 volt-amps.
　
　
Mounting: Adjustable mounting feet provided.
Size: Base dimensions of 27-1/4"w x 30-1/4"d x 26"h (69 x 77 x 66 cm). Platform working height of 36" (91.4 cm).
RS232: Port can be used with LabNetix software.
　

　

Catalog Number Description Input
Voltage		 RPM Product
Weight
(lbs)
099A VS50012 Shaker base only 120V 10-170 165.0
099A VS50024 Shaker base only 240V 10-170 165.0
099A VS5503 Shaker base w/Eight 1-liter separatory funnel holders 120V 10-170 165.0
099A VS550324 Shaker base w/Eight 1-liter separatory funnel holders 240V 10-170 165.0
099A VS5504 Shaker base w/Eight 2-liter separatory funnel holders 120V 10-170 165.0
099A VS5504244 Shaker base w/Eight 2-liter separatory funnel holders 240V 10-170 165.0
Catalog Number Description Height (in) Width (in) Depth (in) Product Weight (lbs)
099A VH1000DS Double holder for 1 liter separatory funnel 11.0 14.00 8.25 9.0
099A VH2000DS Double holder for 2 liter separatory funnel 11.0 14.50 8.25 9.0
099A VH1000DV Double holder for 1 liter volumetric flask 11.0 14.00 8.50 9.0
099A VH2000DV Double holder for 1 liter volumetric flask 11.0 14.50 9.50 9.0
　
WS 180° SHAKER 　
This shaker efficiently agitates small to medium solid phase peptide synthesis flasks. It is also useful for shaking culture flasks and for agitating hard-to-dissolve solids such as polymers.
  • Shakes two flasks simultaneously.
  • Simulates shaking by hand by rotating through 180° of arc.
  • May be used with screw-cap top or side-arm flasks.
  • Two large-finger clamps included to secure glassware up to 3-1/2" in diameter, 10" long.
  • Shaft bearing design permits operation in cold room or incubator.
  • DC filtering promotes longer motor life.
  • Base configuration prevents "walking" on bench top.

Specifications
Electrical: Fuse protector; on/off switch; variable speed control; 6-ft., 3-wire grounded cord.
Electrical Rating: 120 or 240V, 50/60HZ.
Speed Range: 2-30 rpm.
Size: 14"w x 6.5"d x 7"h.
Finish: Foxtip gray and charcoal.
　
Catalog Number Description Input
Voltage		 RPM Product
Weight
(lbs)
099A WS18012 180° shaker w/2-large finger clamps 120V 2-30 11.0
099A WS18024 180° shaker w/2-large finger clamps 240V 2-30 11.0

　

　
SNORKEL STOPPER
With a patented Glas-Col Snorkel Stopper, you''ll never again have to take time to open the stopcock and relieve pressure when vigorously shaking a separatory funnel, because our Snorkel Stopper does the task automatically. If you use a Glas-Col shaker, you can simply load the funnels onto it and get on with more important things without worrying about exploding glass.

The Snorkel Stopper features a one-way check valve that automatically relieves gas pressure. The non-sticking, ground-glass valve is backed with a stainless-steel spring and a Teflon® closure screw for maximum chemical resistance. The valve releases pressure of more than 1 pound and prevents direct air contact with the vessel.

The shape of the stopper allows manual or machine shaking and avoids solution leakage. For manual shaking, the stopper is held in place by hand. On Glas-Col shakers, glassware holders automatically restrain the stopper.

How to order.
Simply select the Snorkel Stopper from the chart that corresponds to the standard tapered stopper size on the funnels you use. Size charts are in many laboratory-supply or glassware catalogs. Then contact your Glas-Col representative.




Catalog Number Fits Standard Taper Stopper Size Product Weight (lbs)
099A SST13 13 0.3
099A SST16 16 0.3
099A SST22 22 0.4
099A SST27 27 0.4
099A SST38 38 0.5
　


PRESSURE RELEASE VALVE

Exclusive! Designed to work specifically with Glas-Col''s new separatory funnels, these pressure release valves reduce the hazards of pressure build-up. They simply slip over the drain of a Glas-Col funnel and tighten down with a twist of the wrist. The valve can be easily removed when it is time to drain the funnel. Each valve is made of Teflon® resin and is factory preset to release at 1 psi of pressure. The valve can be adjusted to release at pressures up to 5 psi by turning the pressure release slug on the top of the valve with a screwdriver. Models are also available to convert other separatory funnels to automatically vent. Weight: .2 lbs.

Catalog Number Description
099A PRV6 For Glas-Col funnels SEP0060-SEP0125 or spout OD 7.5-9.5 mm
099A PRV10 For Glas-Col SEP2000 or spout OD 12.5-13.0 mm
　
VENTSEP
VentSep, a special 1-liter or 2-liter separatory funnel with a built-in relief valve, can be used on Glas-Col''s Bench-top Shaker or either of the Glas-Col 3D shakers. That means you can shake up to eight 2-liter funnels or ten 1-liter funnels at once without worrying about pressure buildup. What''s more, VentSep features a screw cap instead of a penny-head stopper. As a result, VentSep is safer to use in the laboratory because the screw cap doesn''t need restraining and won''t come off at inappropriate times, though it will come off easily when you want it to.VentSep will vent gas pressure over 1 psi automatically. This means you reduce the possibility of unsuspected pressure buildups that could cause exploding glass and personnel injury. As a result, vigorous hand or machine shaking can be done with confidence.
　



　

Catalog Number